Showing posts with label IPMS/Plastic Surgeons. Show all posts
Showing posts with label IPMS/Plastic Surgeons. Show all posts

16 August 2023

2023 IPMS/USA National Convention (2)

Early on Thursday, 3 August--Day Two of the International Plastic Modelers' Society/USA (IPMS/USA) National Convention--I woke up early at my rental room in San Marcos, Texas. After getting dressed, I drove to a Panera Bread near the Embassy Suites and San Marcos Conference Center to get some breakfast. Then, I headed to the Embassy Suites, where a chartered bus awaited some 40 Convention attendees--myself included. The bus left just after 8:00 AM and headed to Fredericksburg, Texas, approximately 90 minutes away through the Texas Hill Country.

The bus arrived at its destination, the National Museum of the Pacific War (NMPW), where our group was to tour. This museum preserves the history of World War II in East Asia and the Pacific. The NMPW is located in Fredericksburg because that was the hometown of Admiral Chester W. Nimitz, who was commander-in-chief of the US Pacific Fleet during World War II.

We began the tour with a short video presentation giving an overview of the Pacific War. After that, we began to make our way through the museum, which houses many interpretive exhibits, artifacts, and videos related to the roots of the war and its beginning in East Asia.

One exhibit of note is HA-19, one of five Japanese two-man submarines used in the attack on Pearl Harbor on 7 December 1941. This submarine was captured intact and was later displayed around the country to raise war bonds.


This museum means a lot to me, since both my father and maternal grandfather served in the US Armed Forces in the Pacific Theater of World War II. My father Harold Delaney was in the Army Air Forces as a radio technician in New Guinea, while my grandfather Harold Koenig was in the Navy on the crew of an escort aircraft carrier in the Southwest Pacific.

Exhibits look at both the war's campaigns and at the home front. Maps help visitors follow the course of the war, along with such artifacts as newspapers and magazines, uniforms, weapons, and personal effects of the troops fighting in the Pacific.








From Pearl Harbor to the Japanese surrender on 2 September 1945, one gets a sense of what World War II in East Asia and the Pacific was like, certainly to a primarily American audience.

After touring the inside of the museum and shopping in the gift shop, we walked outside to see various exhibits. There was a submarine conning tower in front of the museum, and several artillery pieces nearby. The US Presidents who served in the war--from Franklin D. Roosevelt to George H.W. Bush--were recognized in the outdoor area, and there are plaques commemorating individual service personnel, ships, and units involved in the war against Japan.




There is also a Japanese Peace Garden donated to the museum in 1976. It was most serene to walk on the grounds of this garden and to pray for peace among all peoples.





Near the NMPW, along Fredericksburg's main street, is the Admiral Nimitz Gallery. I did not go inside, due to lack of time, but it tells the story of German migration to Texas and to the Nimitz family. This gallery is housed in what was a hotel that Admiral Nimitz's grandfather had run in the mid to late 19th century. A bronze statue of Admiral Nimitz is located near this gallery.



Around 3:15 PM, our group reboarded the bus for the trip back to San Marcos. It waa wonderful experience visiting the museum for the first time. I highly recommend visiting the National Museum of the Pacific War.

Arriving back at the Embassy Suites around 4:45 PM, I went into the Conference Center to check the drawn raffle ticket numbers. (Mine didn't come up.) I also saw more model entries in the contest room and browsed among the vendors. I headed to the lounge where I had a beer and shared some snacks with some members of the IPMS/Plastic Surgeons chapter from Des Moines, Iowa who were at the Convention.

Following this happy hour, I got dinner and then headed back to the rental home to rest up and prepare for Day Three of the Convention.

To be continued...

Websites of Entities Mentioned in this Post:

International Plastic Modelers' Society/USA: IPMS/USA Home Page | By Modelers... For Modelers (ipmsusa.org)

Panera Bread: Panera Bread at , MO | Panera Bread

Embassy Suites and San Marcos Conference Center: Embassy Suites by Hilton San Marcos Hotel Conference Center

National Museum of the Pacific War: National Museum of the Pacific War (pacificwarmuseum.org)

Fredericksburg, Texas: Things to do in Fredericksburg, Texas | Attractions & Nightlife (visitfredericksburgtx.com)

IPMS/Plastic Surgeons: IPMS Plastic Surgeons (ipms-plasticsurgeons.com)

   

03 April 2022

2022 Surgicon in Des Moines

After work Friday night (1 April), I got on the road to Hannibal, Missouri. After driving for nearly two hours, I checked into the Motel 6 there for a night stop. (Reservations were made earlier that week on Hotels.com.) Check in at Motel 6 was smooth and I settled in my room for a good night's sleep.

Early the next morning, I checked out and got on the road to Des Moines, Iowa. After a few brief stops for breakfast, fuel, and to stretch my legs, I arrived nearly four hours later at the Euclid Room of Hy-Vee on East Euclid Avenue in Des Moines. This room was the venue for Surgicon 26, the model contest and swap meet hosted by IPMS/Plastic Surgeons. I checked in my two contest models at registration, placed them in their respective contest categories, and began walking around the venue.






I admired the other models entered in the contest, purchased some raffle tickets, shopped among the vendors, and talked with fellow scale modelers I knew (at least via email). Besides representing IPMS/Gateway, I also went in my capacity as IPMS/USA Region 14 Coordinator. Touching base with several chapter contacts from this region and meeting people from these chapters really made this trip worthwhile.

This was my first time in Des Moines and at this show, which had not been held since 2019 due to the COVID-19 pandemic. It looked like everyone there was having a good time.





For lunch, I walked over to the buffet section of the Hy-Vee supermarket and got a Chinese meal to go. I ate it in the Euclid Room as the contest judging began. It took over three hours for the judging to be completed, including for the special awards. I did win a few raffle prizes and bought three kits and a cockpit detail set from the vendors.

Additionally, I brought flyers for IPMS/Gateway's Invitational on 10 September and picked up flyers for upcoming shows in the region. Prior to the contest results being announced, I and others were invited to promote upcoming shows like that of IPMS/Gateway and the IPMS/USA National Convention in Omaha this July.

The contest drew 297 entries from 55 entrants. My two ship entries did not win any awards--the competition was too strong--but I wasn't worried about that. Being at the show was what mattered. After the announcements, I packed up my contest models and other gear, thanked the hosts, and got in my car for the drive home. I was tired, but happy to attend this show and see some terrific people.

Not counting stops for dinner and fuel, it was about 5 1/2 hours driving time between Des Moines and St. Louis. I was prepared to make a night stop along the way if I was too tired to drive, but it wasn't a problem and I got home safe and sound late last night. My trip to Surgicon and back covered 706.2 miles (1136.5 km). 

Aside from helping my mom buy groceries this morning, I have been relaxing at home today. Back to work tomorrow morning.

Later.

Websites of Entities Mentioned in this Post:

18 April 2021

At Fleacon 2021

Just before 2:30 am yesterday (17 April), I left home to drive to Monticello, Iowa. I was going there to attend Fleacon 17, the annual scale modeling contest and show hosted by IPMS/Alexander Lippisch (http://lippischmodelclub.org/). After nearly six hours (driving plus stops for refreshment and break), I arrived at the show venue, the Monticello Berndes Center (http://www.ci.monticello.ia.us/parks-and-recreation/).

This was my first time at this club's show, and I was going both as a representative of IPMS/Gateway (https://sites.google.com/view/ipmsgatewaychapter/home) and as IPMS/USA Region 14 coordinator (https://calendar.ipmsusa3.org/region/region-14-mid-central). Despite wearing face masks for safety during this COVID-19 pandemic, attendees were having a good time.

Arriving at the show site, my three contest entries were registered and then taken to a judging table, where two judges looked over my entries. After they recorded their scores, my models were released to be placed on the contest tables. This was my first experience with this system in an overall contest, although when I had a armor model entered at KC CON last year in Kansas City, Missouri, that used a similar judging system. (The rest of KC CON's model contest used the standard judging system for IPMS/USA contests.) I entered my 1:48 scale Jupiter-C Explorer 1 rocket in Real Space, my 1:48 Ryan NYP Spirit of St. Louis in Aircraft, and my 1:700 Turbulent in Ships. Depending on the judges' evaluations, a model could receive a Gold, Silver, or Bronze awards, and there were no limits regarding how many awards could go in each category.

I got to chat with several attendees, including Bill Kreuger, Alexander Lippisch's chapter contact; Jeff Hearne, IPMS/US Region 5 (Midwest) coordinator (https://calendar.ipmsusa3.org/region/region-5-midwest); Jim Coatney, Hearne's predecessor as RC-5; and Joachim (Joe) Lotz from IPMS/Plastic Surgeons (http://www.ipms-plasticsurgeons.com/). It was great having face time with people I had mostly or only known via email and social media. There were 30 vendor tables at Fleacon, and it was fun to browse among the kits and related products on sale. I came away with four kits for my stash. I got lunch there at the Berndes Center. A walking taco, chips, and soda were most satisfying and very inexpensive. There was a very nice crowd on the day, helped in part by the pleasant weather for all of us who traveled from as far as Wisconsin and Nebraska, and in part by this being the first scale modeling show in this area for many months. (Fleacon was cancelled last year due to the pandemic.) Walking around the contest tables, I was impressed by the number and quality of contest entries on hand. The final tally was 214 models entered by just over 60 entrants. My three entries were in very good company. I also bought a few raffle tickets. Besides the regular sort of scale modeling show raffle (kits raffled off to winners of regular tickets), there was a premium lottery with higher cost tickets for special kits. The latter prizes were given away just prior to the awards ceremony. I did not win any of the regular and special raffle prizes, but that's fine. I always enter raffles at these shows to show my support for these events and their organizers.
The awards were announced late that afternoon to conclude Fleacon. individual awards for the models were announced. My Turbulent earned a Silver in Ships, while Bronze awards were bestowed upon my Jupiter-C in Real Space and the Spirit of St. Louis in Aircraft. I was most happy to receive these awards. The major awards (such as theme, best of these categories and Best of Show) were then presented.

The hosts asked me to speak briefly to the crowd, and I thanked everyone for coming as well as promoted upcoming contests in Region 14--including the Regional contest IPMS/Gateway will host on 11 September in St. Louis. Then, I packed my models and said my goodbyes to Jeff Hearne (including posing for a joint selfie) and to Bill Kreuger. I also chatted with someone from the the Blackhawk Model Builders Society (https://www.facebook.com/groups/441475143864531/about) from Burlington, Iowa. Several of their members were at the show. They are seeking to join IPMS/USA, and I gave the representative my support for this effort.

After I departed Monticello, I stopped in Marion, Iowa to refuel my car and to get dinner from the drive through lane at Culvers (https://www.culvers.com/) before resuming my journey home to St. Louis. I mostly listened to the radio during my journey, although I did play some CDs in my car during parts of the trip up and back. They included a compilation of Brazilian music that Starbucks (https://www.starbucks.com/?utm_id=bi_cmp-376187578_adg-1233652236403352_ad-77103379775987_kwd-77103416797954:loc-190_dev-c_ext-_prd-_sig-785eacefb5a9155ce210cc93d5dc1082&utm_source=bing&utm_term=starbucks&utm_campaign=BR-Brand-HighVolume-Desktop-Exact&utm_medium=cpc&utm_query=starbucks&utm_matchtype=e&msclkid=785eacefb5a9155ce210cc93d5dc1082&utm_content=Brand%20-%20Starbucks) came out with in 2014, and two jazz CDs: the classic 1959 album "Kind of Blue" by Miles Davis (https://www.milesdavis.com/) and the 2004 album "Motifs" by the French ensemble Paris Combo (https://www.pariscombo.com/). They all made my journey more pleasant.

I made a stop in Hannibal, Missouri to stretch out and get some refreshment last night before arriving home after 11:00 pm. I covered 654.3 miles (1053 km) on the day. I was tired when I got home, but happy about how the day went.

IPMS/Gateway meets this Tuesday night (20 April) at Affton Elks Lodge 2635 (https://www.elks.org/lodges/home.cfm?LodgeNumber=2635). I am making a presentation on current Chinese military aircraft colors and markings. Hope to see you there!

Later.